News Center

Current location:
Homepage
>
>
>
How to install customized timber window seals products

How to install customized timber window seals products

(Summary description)1.customized timber window seals products glass gasket and connecting tape.Window frames and sashes should push the rubber strip into the profile notch with a special roller in the correct direction after the corner gap is welded, and press down the head of the rubber strip until it fits into the profile notch.

How to install customized timber window seals products

(Summary description)1.customized timber window seals products glass gasket and connecting tape.Window frames and sashes should push the rubber strip into the profile notch with a special roller in the correct direction after the corner gap is welded, and press down the head of the rubber strip until it fits into the profile notch.

Information

  1.customized timber window seals products glass gasket and connecting tape

  Window frames and sashes should push the rubber strip into the profile notch with a special roller in the correct direction after the corner gap is welded, and press down the head of the rubber strip until it fits into the profile notch.

Low price timber window seals Manufacturers china

  2. Glass bead

  customized timber window seals products According to the correct surface, insert the tip of the strip into the groove of the profile by hand, then press firmly on the exposed surface of the strip to press the strip into the gap between the glass and the profile. The rubber strips at both ends are indented in the middle, leaving a length of 1-2 cm, then cut and pressed into the notch.

  customized timber window seals products installation notes

  1. Customized timber window seals products Before installing the glass, carefully remove the debris in the notch, such as mortar, brick chips, wood blocks, etc. 2. The rubber sealing strip cannot be stretched too tightly, and the cutting length is 20-30 mm longer than the assembly length.

  3. When fixing the glass with sealant caulking, rubber strips or rubber blocks should be used to squeeze the glass, leaving a gap for glue injection. The depth of glue injection should not be less than 5 mm. Before the glue is cured, the glass should be kept without vibration. 4. The top installation position is usually on the window (door) fan, around the frame fan or on the sealing bridge (windshield) to enhance the seal between the frame and the fan.

  5. Customized timber window seals products The top specification is an important factor affecting the waterproof performance of sliding doors and windows, and also an important factor affecting the opening and closing force of doors and windows. 6. If the specification is too small, or the height of the vertical roof is not enough, it is easy to get out of the groove, which greatly reduces the sealing performance of doors and windows.

Keyword:

Scan the QR code to read on your phone

TEL :  +86 13930924728 / 13930904639 ( Whatsapp )

FAX:  +86 0319 8032997


Add:  A-13,Heigh-Tech Industrial Park, Qinghe County, Xingtai City,Hebei Province, China.

 QINGHE PANGU SEALING TECHNOLOGY

Copyright © QingHe PanGu Sealing Technology Co., Ltd.     冀ICP备2021001835号-1      Power by:300.cn

QINGHE PANGU SEALING TECHNOLOGY