News Center

Current location:
Homepage
>
>
>
timber customized window seals products Installation and preservation matters

timber customized window seals products Installation and preservation matters

(Summary description)1. Before installing the glass, carefully remove the debris in the slot, such as mortar, brick chips, wood blocks, etc. When placing the glass, be careful to center it to ensure that the gap on both sides is even, and fix it in time to prevent collision and displacement. bit and offset notches.

timber customized window seals products Installation and preservation matters

(Summary description)1. Before installing the glass, carefully remove the debris in the slot, such as mortar, brick chips, wood blocks, etc. When placing the glass, be careful to center it to ensure that the gap on both sides is even, and fix it in time to prevent collision and displacement. bit and offset notches.

Information

  1. Before installing the glass, carefully remove the debris in the slot, such as mortar, brick chips, wood blocks, etc. When placing the glass, be careful to center it to ensure that the gap on both sides is even, and fix it in time to prevent collision and displacement. bit and offset notches.

timber window seals for home user

  2. The size is too small, or the vertical top is not high enough, and it is easy to fall out of the groove, which greatly reduces the sealing performance of doors and windows, and the top needs to be siliconized. Pockmarked, meet the requirement of 0.2mm.

  3. Customized timber window seals products The rubber sealing strip should not be pulled too tightly, and the cutting length should be 2O-30mm longer than the assembly length. It should be pre-buried in place during installation, the surface should be flat, and it should be in close contact with the glass and the glass notch, so that the surrounding area of ​​the glass is affected. The force is uniform. At the corner, the adhesive strip should be broken on the inclined plane, and the broken part should be firmly glued.

  4. The top is usually installed on the sash, around the sash of the sash or on the sealing bridge to enhance the seal between the sash and the sash.

  5. Customized timber window seals products When caulking the glass with sealant, the glass should be squeezed with rubber strips or rubber blocks first, leaving a gap for glue injection. The glue injection depth should not be less than 5mm. Before the glue is cured, the glass should be kept. Not subject to vibration.

Keyword:

Scan the QR code to read on your phone

TEL :  +86 13930924728 / 13930904639 ( Whatsapp )

FAX:  +86 0319 8032997


Add:  A-13,Heigh-Tech Industrial Park, Qinghe County, Xingtai City,Hebei Province, China.

 QINGHE PANGU SEALING TECHNOLOGY

Copyright © QingHe PanGu Sealing Technology Co., Ltd.     冀ICP备2021001835号-1      Power by:300.cn

QINGHE PANGU SEALING TECHNOLOGY