News Center

Current location:
Homepage
>
>
>
Items that must be checked after installation of pe coated rubber seal

Items that must be checked after installation of pe coated rubber seal

(Summary description)Before assembling the pe coated rubber seal, do the machining inspection procedures, measure whether the dimensions of the cavity and the shaft are correct, especially the inner chamfer, there should be no slope, the end face of the shaft and the cavity should be smooth and clean, and the chamfer should not be damaged. and burrs, clean the assembly parts.

Items that must be checked after installation of pe coated rubber seal

(Summary description)Before assembling the pe coated rubber seal, do the machining inspection procedures, measure whether the dimensions of the cavity and the shaft are correct, especially the inner chamfer, there should be no slope, the end face of the shaft and the cavity should be smooth and clean, and the chamfer should not be damaged. and burrs, clean the assembly parts.

Information

  Before assembling the pe coated rubber seal, do the machining inspection procedures, measure whether the dimensions of the cavity and the shaft are correct, especially the inner chamfer, there should be no slope, the end face of the shaft and the cavity should be smooth and clean, and the chamfer should not be damaged. and burrs, clean the assembly parts.

pe coated rubber seal

  The requirement for pe coated rubber seal manufacturers today is to have good environmental performance while improving efficiency and system availability. The pe coated rubber seal that are subjected to dynamic loads also undertake a more difficult task - extending the service life of the lubricating film as much as possible, reducing friction and avoiding leakage.

  In addition, pe coated rubber seal manufacturers are now more and more inclined to use elastomer materials and thermoplastic materials suitable for use in low-viscosity media, so when the seal is subjected to high pressure and high temperature loads or restarted after a long period of idleness Crawls can easily occur.

  Before assembling the pe coated rubber seal, do a good job of checking the oil seal, and measure whether the size of each part of the skeleton oil seal is consistent with the size of the shaft and the cavity. to match.

Keyword:

Scan the QR code to read on your phone

TEL :  +86 13930924728 / 13930904639 ( Whatsapp )

FAX:  +86 0319 8032997


Add:  A-13,Heigh-Tech Industrial Park, Qinghe County, Xingtai City,Hebei Province, China.

 QINGHE PANGU SEALING TECHNOLOGY

Copyright © QingHe PanGu Sealing Technology Co., Ltd.     冀ICP备2021001835号-1      Power by:300.cn

QINGHE PANGU SEALING TECHNOLOGY