News Center

Current location:
Homepage
>
>
>
How do timber window seals manufacturers install door and window seals

How do timber window seals manufacturers install door and window seals

(Summary description)After the door and window sealing strip is installed, it prevents the penetration of rainwater and enhances the sealing performance of the door and window, so it is one of the indispensable accessories for the door and window. However, how can wooden window weatherstrip manufacturers use and install them correctly

How do timber window seals manufacturers install door and window seals

(Summary description)After the door and window sealing strip is installed, it prevents the penetration of rainwater and enhances the sealing performance of the door and window, so it is one of the indispensable accessories for the door and window. However, how can wooden window weatherstrip manufacturers use and install them correctly

Information

  After the door and window sealing strip is installed, it prevents the penetration of rainwater and enhances the sealing performance of the door and window, so it is one of the indispensable accessories for the door and window. However, how can wooden window weatherstrip manufacturers use and install them correctly?

timber window seals factory

  Three key points for the wooden window weatherstrip manufacturer to install the weatherstrip correctly

  1. Before installing the glass, the manufacturer of the timber window sealsing strip should carefully remove the sundries in the slot, such as mortar, brick chips, wood blocks, etc., when placing the glass, it should be carefully centered to ensure that the gap on both sides is even, and it should be corrected and fixed in time. Prevents bump shifting, off-centre of the notch.

  2. The rubber sealing strip cannot be pulled too tight, and the cutting length is 20-30mm longer than the assembly length. The manufacturer of the timber window seals should be inlaid in place during installation, the surface should be straight, and it should be in close contact with the glass and the glass slot, so that the surrounding of the glass is evenly stressed. The rubber strip should be beveled off at the corners, and glued firmly at the break.

  3. When the timber window sealsing strip manufacturer uses sealant to fill the gap to fix the glass, the glass should be squeezed with a rubber strip or rubber block first, leaving a gap for glue injection. The glue injection depth should not be less than 5mm, and it should be kept before the glue is cured Glass is not subject to vibration.

Keyword:

Scan the QR code to read on your phone

TEL :  +86 13930924728 / 13930904639 ( Whatsapp )

FAX:  +86 0319 8032997


Add:  A-13,Heigh-Tech Industrial Park, Qinghe County, Xingtai City,Hebei Province, China.

 QINGHE PANGU SEALING TECHNOLOGY

Copyright © QingHe PanGu Sealing Technology Co., Ltd.     冀ICP备2021001835号-1      Power by:300.cn

QINGHE PANGU SEALING TECHNOLOGY