News Center

Current location:
Homepage
>
>
>
The sponge door seal factory shares the precautions for the installation of door and window seals

The sponge door seal factory shares the precautions for the installation of door and window seals

  • Categories:spong door seal
  • Author:
  • Origin:
  • Time of issue:2022-05-11
  • Views:0

(Summary description)1. The sponge door seal factory shares glass gaskets and sealing rubber strips.After the window frame and window sash are welded and cleaned, use a special roller to push the rubber strip into the profile slot with a small force according to the correct surface and direction, and press the head of the rubber strip down until it is embedded in the profile slot.

The sponge door seal factory shares the precautions for the installation of door and window seals

(Summary description)1. The sponge door seal factory shares glass gaskets and sealing rubber strips.After the window frame and window sash are welded and cleaned, use a special roller to push the rubber strip into the profile slot with a small force according to the correct surface and direction, and press the head of the rubber strip down until it is embedded in the profile slot.

  • Categories:spong door seal
  • Author:
  • Origin:
  • Time of issue:2022-05-11
  • Views:0
Information

  Sponge door seal factory door and window seal installation method:

spong door seal

  1. The sponge door seal factory shares glass gaskets and sealing rubber strips

  After the window frame and window sash are welded and cleaned, use a special roller to push the rubber strip into the profile slot with a small force according to the correct surface and direction, and press the head of the rubber strip down until it is embedded in the profile slot.

  2. Glass slats

  The sponge door seal factory manually puts the rubber strip into the profile groove according to the correct surface, then press the exposed surface of the rubber strip to press the rubber strip into the gap between the glass and the profile.

  Matters needing attention for the installation of door and window seals in the sponge door seal factory:

  1. Before installing the glass in the sponge door seal factory, the mortar, brick chips, wood blocks and other debris in the slot should be carefully removed. When placing the glass, it should be carefully aligned to ensure that the gap on both sides is even and fixed in time to prevent collision and displacement. position and offset from the center of the notch.

  2. The rubber sealing strip should not be pulled too tightly, and the cutting length should be 20-30mm longer than the assembly length.

  3. The sponge door seal factory believes that when the glass is sealed and fixed with sealant, the glass should be squeezed with a rubber strip or rubber block to leave a gap for glue injection.

  4. The installation position of the hair top is generally on the window (door) sash, the periphery of the frame sash or the sealing bridge (windshield) to strengthen the seal between the frame and the sash.

  5. The top surface specification is an important factor affecting the waterproof performance of sliding doors and windows, and also an important factor affecting the opening and closing force of doors and windows.

  6. The sponge door seal factory feels that if the size is too small, or the height of the vertical top is not enough, it is easy to fall off from the groove, which greatly reduces the sealing performance of doors and windows.

Keyword:

Scan the QR code to read on your phone

TEL :  +86 13930924728 / 13930904639 ( Whatsapp )

FAX:  +86 0319 8032997


Add:  A-13,Heigh-Tech Industrial Park, Qinghe County, Xingtai City,Hebei Province, China.

 QINGHE PANGU SEALING TECHNOLOGY

Copyright © QingHe PanGu Sealing Technology Co., Ltd.     冀ICP备2021001835号-1      Power by:300.cn

QINGHE PANGU SEALING TECHNOLOGY