News Center

Current location:
Homepage
>
>
>
What is the replacement process of the customized door frame seal of the car?

What is the replacement process of the customized door frame seal of the car?

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-07-20
  • Views:0

(Summary description)Thoroughly clean and dry the parts where sound insulation sealing strips need to be installed and the planes of the sealing strips.

What is the replacement process of the customized door frame seal of the car?

(Summary description)Thoroughly clean and dry the parts where sound insulation sealing strips need to be installed and the planes of the sealing strips.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-07-20
  • Views:0
Information

Do you know what the replacement introduction process of the customized door frame seal of the car is? Let’s take a look at it briefly!
1. Thoroughly clean and dry the parts where sound insulation sealing strips need to be installed and the planes of the sealing strips.
2. Choose the sticking position, and after finding the starting point for sticking, press and paste the sealing strip a little bit. Be careful not to pull the sealing strip a little bit. Try to keep the original shape of the sealing strip and align it slowly with the correct paste The path is carefully pasted; at the corner of the knot, the sealing strip should be bent very gently, not too sharp to affect the appearance. In addition, do not stick other impurities such as dust on the 3M adhesive, and you can't be quick and urgent when pasting, so as to ensure the effect, so as to ensure the effect, so as to ensure the effect, so as to ensure the effect.


3. After everything is pasted in place and checked, the soundproof strips are properly trimmed, and after a while, the work can be finished by pressing it carefully and carefully by hand. It is recommended not to close the door at this time, wait for 20 minutes with the door open, close the door again, and then it is recommended to wait 3-5 hours before opening the door for normal use.
4. After the paste is completed, it is forbidden to pull the sealing strip by hand, and it is forbidden to wash the car within 3 days (if it rains, then there is no way), try not to open and close the door repeatedly within 24 hours.
5. After the construction is completed, the door will be closed tightly. When driving, you must pay attention to whether the door is closed tightly and pay attention to driving safety.
6. The sealing strip must be under positive pressure after the installation position is closed, so that the back can be fully used. (Positive pressure: the direction of pressure is perpendicular to the plane where the adhesive is located).
The above is an introduction to the replacement process of the customized door frame seal of the car, you can learn more about it.

Keyword:

Scan the QR code to read on your phone

TEL :  +86 13930924728 / 13930904639 ( Whatsapp )

FAX:  +86 0319 8032997


Add:  A-13,Heigh-Tech Industrial Park, Qinghe County, Xingtai City,Hebei Province, China.

 QINGHE PANGU SEALING TECHNOLOGY

Copyright © QingHe PanGu Sealing Technology Co., Ltd.     冀ICP备2021001835号-1      Power by:300.cn

QINGHE PANGU SEALING TECHNOLOGY